Year: 2017
When to use a Real Thermal Switch not a Sensor
When CPI started making thermal switches for the Military in the 40’s, there really wasn’t any other choice. Thermocouple based switches with variable set-points and various temperature ranges of operation were made using the thermocouple materials of the day, mostly… Continue reading When to use a Real Thermal Switch not a Sensor
Military Grade Waterproof Switches
At CPI, we’ve been telling people for years about the robustness and reliability built into every USA designed and manufactured waterproof switch that we make. For applications from recreational vehicles, to advanced military and avionics applications, CPI switch hardware gets… Continue reading Military Grade Waterproof Switches
When Old Technology Becomes New Again – Part II
Two important considerations when looking at the integration of any hydraulic linear position sensor are the underlying technology and the packaging of the transducer. These principles effect size, life, maintainability, and above all, durability. The underlying technology used influences the… Continue reading When Old Technology Becomes New Again – Part II
When Old Technology Becomes New Again…
Interestingly when one looks back at the history of hydraulic position sensing technology some of the earliest ideas from as far back as the 1950’s revolved around both potentiometer based implementations and draw wire systems. Potentiometer based systems with their… Continue reading When Old Technology Becomes New Again…
Motion Compensation System Hydraulics Can Get A Whole Lot Smarter.
The environment in which the search for oil is conducted beneath the surface of the seas is ever changing and often treacherous. It changes constantly due to the ebb and flow of the surface of the water and operation during… Continue reading Motion Compensation System Hydraulics Can Get A Whole Lot Smarter.
Monitoring Equipment Temperature is a SnapStat with CPI Switches
Almost every large commercial machine with an engine or motor of some sort has a system for monitoring temperature. Critical systems that are thermally controlled can be designed to shut down or throttle operation to prevent system failure or deliver… Continue reading Monitoring Equipment Temperature is a SnapStat with CPI Switches
When Smoking is a Good Thing
If you work at TARDEC (the Tank and Automotive Research Development Center) you pretty much spend all day thinking about how to increase the survivability of ground vehicles during combat operations. In fact, the folks at TARDEC have created a… Continue reading When Smoking is a Good Thing
Dump Truck Safety System Design
The design of the modern work truck is moving forward at an amazing pace. With long haul trucks, the focus has been on collision avoidance systems and advanced controls for fuel economy, but dump truck builders have long had a… Continue reading Dump Truck Safety System Design
Dump Body Position Detection Gets National Attention
We’ve spoken in the past about the use of our limit switches as Dump Body position detection indicators, but recently this application was highlighted in a dramatically viral way. As Carlos Escobedo and his father were travelling down the East… Continue reading Dump Body Position Detection Gets National Attention
CPI Sponsors International Submarine Races
In June of this year, CPI was approached to help sponsor an entry in the 14th International Submarine Race held June 22-26 at the U. S. Naval Surface Warfare Center’s Carderock test tank facility in Bethesda, MD. The contest is… Continue reading CPI Sponsors International Submarine Races