Dump Body Detect Switch
E1 NC Limit Switch
Mounted on the understructure of the dump body, our E1092 bracket houses a normally-closed switch to sense that the dump bed is in the down position. The switches are usually connected to an indicator lamp on the truck cab dashboard.
Product Features
- All-stainless bracket
- Simulated roller spring actuator
- IP68 rated waterproof switch
- .81″ (20.57mm) total travel (approx.)
- SPST normally-closed (standard); normally-opened and SPDT circuits available
- 18AWG GXL insulated SAE-J1128 wire leads (18″ standard length; custom lengths available)
Related Part Numbers
-
E1078 Simulated Lever Flush Mount
-
E1092 Simulated Roller Angle Mount
-
E1094 Straight Lever Flush Mount
-
E1096 Roller Lever Flush Mount
-
E1102 Roller Lever Angle Mount
-
E1105 Roller Lever Angle Mount
-
E1112 Simulated Roller Angle Mount
-
E1117 Roller Lever Angle Mount
-
E1127 Simulated Roller Flush Mount
-
E1129 Simulated Roller Angle Mount
-
E1134 Roller Lever Flush Mount
-
E1161 Roller Lever Angle Mount
-
E1283 Roller Lever Flush Mount
-
E1294 Straight Lever Flush Mount
-
E1303 Simulated Roller Reverse Angle Mount
-
E1310 Simulated Roller Reverse Angle Mount
-
J4401-514 Plunger Switch with Exclusion Seal
-
J4401 Plunger with Heat Sink