Construction Machinery
Construction vehicles require switches that withstand exposure to high vibration, shock, dust, and moisture and may require extended electromechanical endurance.
Our waterproof, snap-action industrial-grade B Series switches and E1 Series limit brackets are the most common choice for this industry. They offer resistance to high vibration and shock and are rated waterproof and to IP68.
General Product Features:
- Integral SAE J1128 wire leads (18AWG GXL insulation; individual leads only)
- IP68 rated waterproof / dustproof
- -65F to 221F operating temperature (depending on momentary switch cover matl)
- Over 1 million electromechanical cycles possible (depending on electrical load and mechanical requirements)
Customizations Available:
- Wire and cable lengths
- Wire treatments: wire abrasion protection, marking, labeling, etc
- Wire colors
- Weatherpak / Metripak, Deutsch connectors and other terminations
- Spring & bracket modifications or design changes
Our Most Popular Products for Aerospace & Military Industries
Construction Machinery Applications Include:
- Back-up Alarm Switch
- Brake Over-Temp Warning
- Cab Closed Interlock Switch
- Door Interlock
- Door Switch
- Dump Body Detect Switch
- Horn Switch
- Hydraulic Cylinder Position Sensor
- Hydraulic Jack Position Sensor
- Idle Validation Switch
- Lift Up/Down Control
- Operator Presence Switch
- Outrigger Position Sensing
- Park Brake Switch
- Remote Horn Signal Switch
- Return to Dig Limit Switch
- Seat Position Switch
- Wiper Interlock Switch
-
AD001 – Stud Mount Stainless Can Temperature Switch (8-32UNC 2A stud)
-
B5111 Normally Open, Low Pushbutton Switch
-
J4001 Normally-open, 9/16 – 18 UNF-2A thread
-
B5112 Normally Closed, Low Pushbutton Switch
-
B5113 SPDT, Low Pushbutton Switch
-
B5114 Normally Open, Low Pushbutton Switch
-
B5115 Normally Closed, Low Pushbutton Switch
-
B5116 SPDT, Low Pushbutton Switch
-
B5131 Normally Open, Medium Pushbutton Switch
-
B5132 Normally Closed, Medium Pushbutton Switch
-
B5133 SPDT, Medium Pushbutton Switch
-
B5134 Normally Open, Medium Pushbutton Switch
-
B5135 Normally Closed, Medium Pushbutton Switch
-
B5136 SPDT, Medium Pushbutton Switch
-
B5151 Normally Open, High Pushbutton Switch
-
B5152 Normally Closed, High Pushbutton Switch
-
B5153 SPDT, High Pushbutton Switch
-
B5154 Normally Open, High Pushbutton Switch
-
B5156 SPDT, High Pushbutton Switch
-
B7111 Normally Open, Low Pushbutton, Low Force
-
J4002 Normally-closed, 9/16 – 18 UNF-2A thread
-
B7112 Normally Closed, Low Pushbutton, Low Force
-
B7113 SPDT, Low Pushbutton, Low Force
-
B7114 Normally Open, Low Pushbutton, Low Force
-
B7115 Normally Closed, Low Pushbutton, Low Force
-
B7116 SPDT, Low Pushbutton, Low Force
-
B7131 Normally Open, Medium Pushbutton, Low Force
-
B7132 Normally Closed, Medium Pushbutton, Low Force
-
B7133 SPDT, Medium Pushbutton, Low Force
-
B7134 Normally Open, Medium Pushbutton, Low Force
-
B7135 Normally Closed, Medium Pushbutton, Low Force
-
B7136 SPDT, Medium Pushbutton, Low Force
-
B7151 Normally Open, High Pushbutton, Low Force
-
B7152 Normally Closed, High Pushbutton, Low Force
-
B7153 SPDT, High Pushbutton, Low Force
-
B7154 Normally Open, High Pushbutton, Low Force
-
B7155 Normally Closed, High Pushbutton, Low Force
-
B7156 SPDT, High Pushbutton, Low Force
-
B9111 Normally Open, Low Pushbutton, Low Temp
-
B9112 Normally Closed, Low Pushbutton, Low Temp
-
B9113 SPDT, Low Pushbutton, Low Temp
-
B9114 Normally Open, Low Pushbutton, Low Temp
-
B9115 Normally Closed, Low Pushbutton, Low Temp
-
B9116 SPDT, Low Pushbutton, Low Temp
-
B2002 Normally Open, Low Pushbutton Switch, MIL grade
-
B2004 SPDT, Low Pushbutton Switch, MIL grade
-
B2005 Normally Open, Low Pushbutton Switch, MIL grade
-
B2006 Normally Closed, Low Pushbutton Switch, MIL grade
-
B2007 SPDT, Low Pushbutton Switch, MIL grade
-
B2030 Normally Open, High Pushbutton Switch, MIL grade
-
B2031 Normally Closed, High Pushbutton Switch, MIL grade
-
J4311 Normally-open, .625 – 18 UNF-2A thread
-
K1006 Normally Open Internal Lever Switch
-
K1009 Normally Closed Internal Lever Switch
-
K1008 Normally Open Internal Lever Switch
-
K1032 Normally Closed Internal Lever Switch
-
E1128 Pendant With Hook Handle
-
J4312 Normally-closed, .625 – 18 UNF-2A thread
-
E1057 Mounting Bracket Maintained Contact Rocker Waterproof Switches
-
E1058 – Waterproof Switch Panel
-
D1022 Panel Mount Waterproof Plunger Switch
-
K1005 SPST Maintained Rocker Switch
-
X1034 – Close-On-Rise (SPST), 1/2-20UNF-3A Thread w/ Teflon Leads
-
SL0390 Linear Position Sensor – 40″ (1 meter)
-
D1040 Panel Mount Waterproof Plunger Switch
-
E1333 – Waterproof Switch Panel
-
K1007 SPST Maintained Rocker Switch
-
K1109 – Waterproof Switch Panel
-
K5111 SPST Maintained Rocker Switch, Commercial Grade
-
E1046 Straight Lever Flush Mount, Dual Switch
-
K5114 SPST Maintained Rocker Switch, Commercial Grade
-
AD007 – All Stainless Temperature Switch (3/4-16UNF-3A)
-
J4414 Plunger Switch with Dual Plunger Seal
-
J4401-514 Plunger Switch with Exclusion Seal
-
J4401 Plunger with Heat Sink
-
E1085 Roller Lever Flush Mount, Dual Switch
-
AD008 – 1.00″ Probe, All Stainless, Temperature Switch (1/2-14 NPT)
-
E1092 Simulated Roller Angle Mount
-
M2002 – Bimetal Thermal Switch, Close-on-Fall, 1/2-20UNF-3A thread / Glass-Sealed Connector
-
AD009 – 0.50″ Probe, All Stainless, Temperature Switch (1/2-14 NPT)
-
SL1390 – Internal-Mount Linear Position Sensor – 40″ (1 meter)
-
E1094 Straight Lever Flush Mount
-
M2101 – Bimetal Thermal Switch, Open-on-Fall, 1/2-20UNF-3A thread / Glass-Sealed Connector
-
AD010– 1.50″ Probe, All Stainless, Temperature Switch (1/2-14 NPT)
-
SL2000 Internal Mount Safety Rated Linear Position Sensor – 32 ft (10 Meters)
-
SL4000 Internal Mount Safety Rated Linear Position Sensor – 46 ft (14 Meters)
-
SL5000 Internal Mount Safety Rated Linear Position Sensor – 52 ft (16 Meters)
-
E1096 Roller Lever Flush Mount
-
M2102 – Bimetal Thermal Switch, Open-on-Rise, 1/2-20UNF-3A thread / Glass-Sealed Connector
-
AD011– 2.00″ Probe, All Stainless, Temperature Switch (1/2-14 NPT)
-
E1100 Straight Lever Angle Mount
-
AD012– 0.25″ Probe, All Stainless, Temperature Switch (1/2-14 NPT)
-
E1101 Straight Lever Angle Mount
-
AD013 – All Stainless Temperature Switch (1/2-14 NPT)
-
E1102 Roller Lever Angle Mount
-
AD014- All Stainless Temperature Switch (1/2-14 NPT)
-
E1103 Roller Lever Angle Mount
-
AD019 – All Brass Temperature Switch (1/2-14 NPT)
-
E1105 Roller Lever Angle Mount
-
E1106 Profiled Lever Flush Mount
-
E1112 Simulated Roller Angle Mount
-
E1115 Simulated Roller Flush Mount
-
E1117 Roller Lever Angle Mount
-
E1118 Low Simulated Roller Angle Mount
-
E1120 Low Simulated Roller Angle Mount
-
E1127 Simulated Roller Flush Mount
-
E1129 Simulated Roller Angle Mount
-
E1131 Simulated Roller Lever Angle Mount, Dual Switch
-
E1134 Roller Lever Flush Mount
-
E1161 Roller Lever Angle Mount
-
E1283 Roller Lever Flush Mount
-
E1294 Straight Lever Flush Mount
-
AD025 – 0.75″ Probe, Brass & Stainless Temperature Switch (1/2-14 NPT)
-
E1303 Simulated Roller Reverse Angle Mount
-
E1310 Simulated Roller Reverse Angle Mount
-
AD027 – 6.00″ Probe, All Stainless Flange-Mount Temperature Switch
-
AD028 – 19.00″ Probe, All Stainless Flange-Mount Temperature Switch
-
AD029 – 9.00″ Probe, All Stainless Flange-Mount Temperature Switch
-
AD030 – 3.00″ Probe, All Stainless Flange-Mount Temperature Switch
-
AD032 – 1.00″ Probe, Brass & Stainless Temperature Switch (1/2-14 NPT)
-
AD033 – 0.50″ Probe, Brass & Stainless Temperature Switch (1/2-14 NPT)
-
AD034 – 1.50″ Probe, Brass & Stainless Temperature Switch (1/2-14 NPT)
-
AD035 – 2.00″ Probe, Brass & Stainless Temperature Switch (1/2-14 NPT)
-
AD036 – 0.50″ Probe, Brass & Stainless Temperature Switch (1/2-14 NPT)
-
AD037 – 1.00″ Probe, Brass & Stainless Temperature Switch (1/2-14 NPT)
-
AD040 – 0.25″ Probe, Brass & Stainless Temperature Switch (1/2-14 NPT)
-
AD042 – 0.75″ Probe, All Stainless Temperature Switch (1/2-14 NPT)
-
AD044 – 2.00″ Probe, All Stainless Temperature Switch (1/2-14 NPT)
-
AD047 – Aluminum Can Surface Temperature Switch
-
AD048 – Stainless Can Surface Temperature Switch
-
AD050 – Brass Dual Thread-Mount Temperature Switch (1/2-14 NPT)
-
AD054 – 1.00″ Probe, All Stainless Flange-Mount Temperature Switch
-
AD069 – All Stainless Flange Mount Surface Temperature Switch
-
AD070- 2.00″ Probe, All Stainless Flange-Mount Temperature Switch
-
AD071 – 0.50″ Probe, All Stainless Flange-Mount Temperature Switch
-
AD074 – 1.50″ Probe, All Stainless Flange-Mount Temperature Switch
-
AD075 – 0.75″ Probe, All Stainless Flange-Mount Temperature Switch
-
AD076 – 2.125″ Probe, All Stainless Flange-Mount Temperature Switch
-
AD077 – Dual Thread, All Stainless Temperature Switch (1/2-14 NPT)
-
AD086 – 3.00″ Probe, All Stainless Temperature Switch (1/2-14 NPT)
-
AD105 – 0.50″ Probe, All Brass Temperature Switch (1/2-14 NPT)
-
AD114 – 3.00″ Probe, Brass & Stainless Temperature Switch (1/2-14 NPT)
-
AD115 – 4.00″ Probe, Brass & Stainless Temperature Switch (1/2-14 NPT)
-
AD125 – 0.25″ Probe, All Stainless Temperature Switch (1/2-14 NPT)
-
AD126 – 0.25″ Probe, Brass & Stainless Temperature Switch (1/2-14 NPT)
-
AD131 – 0.50″ Probe, All Stainless Temperature Switch (1/2-14 NPT)
-
AD148 – 0.50″ Probe, All Stainless Temperature Switch (1/2-14 NPT)
-
AD190 – High Dielectric (5000 VAC) Surface Temperature Switch
-
AD191 – High Dielectric (5000 VAC) Surface Temperature Switch
-
AD196 – High Dielectric (5000 VAC) Surface Temperature Switch
